Dust covers – Roland Jupiter
Potentiometer/slider dust covers/gaskets for ROLAND Jupiter series synthesizers
Old classic Roland synthesizers e.g. Juno, Jupiter/MKS series use slider dust cover to reduce sliders‘ contamination with dust and dirt. After more than 35 years they become brittle and crumble into slider’s inside. This causes scratching and tight movement of slider’s shaft. It is necessary to replace the old dust covers with new ones. Below are listed dust cover replacement kits for a number of Roland models.
Available kits:
- Slider dust covers (set) for Roland Jupiter 4
- Slider dust covers (set) for Roland Jupiter 6 (with adhesive layer)
- Slider dust covers (set) for Roland Jupiter 6 (without adhesive layer)
- Slider dust covers (set) for Roland Jupiter 8
Scroll down to see the precise description and pictures of each set!
Slider dust covers (set) for Roland Jupiter 4
- Set contains 21 individual pieces:
- 1x for 5 pots
- 1x for 4 pots (bender module)
- 1x for 3 pots
- 2x for 2 pots
- 4x for 1 pot
- 12x for toggle switches (12th piece is a spare, the synth needs only 11 pcs.)
- Material is new and highly elastic EPDM rubber (as original), thickness 1.5 mm. Origin: Germany
- Price: 35€/set (net price)(order via email)
Slider dust covers (set) for Roland Jupiter 6 (with adhesive layer)
- Set contains 8 individual pcs. (5 pcs. are of the same type)
- 7 pcs. are for main control panel, 1 pc is for bender panel
- Material is new and highly elastic EPDM rubber (as original). One side is self-adhesive
- These dust covers were made with fastening „wings“ (as original). Due to self-adhesive side, it is difficult to put the wings into slots. Cutting off the wings makes installation more easy. Dust covers stick very strong to metal surface.
- Price: 35€/set (net price)(order via email)
Application example
Old vs. new
JP-6
Slider dust covers (set) for Roland Jupiter 6 (without adhesive layer)
- NON-adhesive version, as original
- Set contains 8 individual pieces:
- 1x for 10 pots
- 1x for 5 pots
- 5x for 2 pots (type 1)
- 1x for 2 pots (type 2)(for bender module)
- Material is new and highly elastic EPDM rubber (as original), thickness 1.5 mm. Origin: Germany
- Price: 35€/set (net price)(order via email)
JP-8
Slider dust covers (set) for Roland Jupiter 8
- Set consists of 29 individual pcs.
- For main control panel & for bender panel
- Material is new and highly elastic EPDM rubber (as original). Origin: Germany
- Dust covers for KYBD/POLAR, SYNC/RANGE, VCO1-BEND/VCO2-BEND/VCF-BEND/VCO-MOD/VCF-MOD are divided into single pieces (in comparison to original covers, see photo below). This avoids tearing of a dust cover.
- Price: 45€/set (net price)(order via email)